![]() If you connected any devices to the wireless network before you have changed the Wi-Fi name and password, you will have to reconnect them after changing the password and restarting the router, and log in again after entering the new password. In the field Wireless Password set the password you want to use for connecting to your Wi-Fi network. If you configure this part in a different way, users won’t be able to connect to such a hotspot. ![]() It suggests naturally that AES encryption should be used with WPA2-PSK, while the best option for WPA-PSK is using TKIP. However, WPA2 provides better safety than its predecessor, the WPA protocol, because WPA2 protocol supports the AES standard which enhances its protection greatly. Both protocols, WPA and WPA2, offer high standards for data security and improved access control for users trying to access wireless networks. You can choose the authentication type, WPA-PSK or WPA2-PSK. You can choose to have any network name you like. For example, like in my case: Wireless 2.4 GHz.Įnable wireless mode (if it was disabled), and set the Wireless Network Name in the Basic Settings menu. Now move on to the tab of the Wi-Fi network you need to configure. In all other cases, you should go for 2.4 GHz. To cut the long story short, if there is a lot of interference in your area and your devices support 5 GHz data transmission, it is recommended to use 5 GHz wireless networks. ![]() In both cases, 5 GHZ is a better choice, because it gives you more channels to isolate your network from other networks, and there are less sources of interference for this frequency. They produce more interference into the frequency environment which reduces the speed of wireless connection. Mainly, these are microwave ovens and wireless handsets (also known as cordless phones), as well as other devices. This is because there are many other devices that also use the frequency of 2.4 GHz. The other difference is the number of devices working with such frequencies – at 2.4 GHz the wireless signal is more prone to interference than at 5 GHz. That is, if you worry about the coverage area, you should opt for 2.4 GHz. It can be explained through the main wave characteristics – the higher is the frequency, the sooner waves will fade out. When the frequency 2.4 GHZ is used, the signal is transmitted to longer distance compared to that of the 5 GHz frequency. The primary difference between the wireless connection frequencies (2.4 and 5 GHz) is the range of signal.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |